Product Description
VIAIR 20008 High-Flow Air Source Kit
High-Flow 200 CHINAMFG Air Source Kits come with a powerful, low amp-draw 480C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 CHINAMFG Air Source kits come with a pre-wired 165/200 CHINAMFG pressure switch. Both kits not only come with the industry’s leading 200 CHINAMFG compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8-inch air line pre-installed!!!!
To use, simply connect the pressure switch to fused power, make a CHINAMFG ground and connect an air line to the compression fitting. The use of a 40-amp relay and an appropriately-rated fuse is strongly recommended to preserve the life of the pressure switch.
Why is Viair the Best??
– Industry Leader for 12v Air Systems
-No Maintenance Oil-Less Design Compressors
-Thermal Overload Protection
-High Performance PTFE Rings
-Gearless Direct Drive PMG Motors
-ISO 9001 Certified
200psi Air Compressor (100% Duty @ 100psi)
Use For Air Horns
Use For Load Level Air Springs
Use For Suspension Air Bags
Use For Air Lockers
Use For Tire Inflation
Use For Air Tools
Features:
– Gearless, direct-drive electric motors
– Oil-less design requires no maintenance (beside filter inspection/replacement)
– High performance, heavy duty PTFE piston ring
– Anodized piston cylinder for increased wear protection
– Precision, high speed, durable bearings for increased piston & motor life
– Sealed motor housing for moisture resistance
– Environmental seals where electrical connections enter motor housing
– Efficient, oversized heat sink head assembly for increased heat dissipation, duty cycle & performance
– High performance check valve eliminates restart pressure on head and piston
– Replacement air filter elements (filtration to 10 microns)
– Heavy duty mounting feet
– Reinforced vibration isolators for safe & quiet operation
– Mounting hardware (bolts, washers, locking washers, nuts)
– Thermal overload protection that protect compressor in event of overheating/over duty cycle operation
– Maximum operating temperature is 158 F
– Minimum operating temperature is -40 F.
– Wires terminated with ring ground terminal & spade positive lead terminal
– VIAIR 12 Month Manufacturer Warranty
Specifications:
VIAIR PN: 20008
VIAIR 480c Compressor
12-Volt
Permanent Magnetic Motor
Duty Cycle: 100% @ 100 CHINAMFG (50% @ 200 PSI)
Max. Working Pressure: 200 PSI
Max. Amp Draw: 23 Amps
Dimensions: 19.7″L x 5.9″W x 13.9″H
Kit Includes:
Pressure Switch(165psi ON – 200psi OFF)
Compression Fitting for 3/8” ID Tubing
Leader Hose with Check Valve
250psi Safety Valve
Drain Petcock
Mounting Hardware
Tank Fill Rate:
0 to 200 CHINAMFG —–3 Min. 56 Sec.
165 to 200 CHINAMFG —–1 Min. 02 Sec.
| Material: | Aluminum Alloy |
|---|---|
| Certification: | ISO10012, BSCI, GMP, GSV, ISO13485, OHSAS18001, ISO14001, ISO/TS16949, ISO9001 |
| Car Make: | Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chery, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia |
| Position: | Rear |
| OEM: | Yes |
| Type: | Buffer for Suspension |
| Samples: |
US$ 69/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
.webp)
Can air compressors be used for painting and sandblasting?
Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:
Painting:
Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:
- Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
- Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
- Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.
Sandblasting:
Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:
- Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
- Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
- Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.
When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.
Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.
.webp)
How are air compressors employed in the mining industry?
Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:
1. Exploration and Drilling:
Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.
2. Ventilation and Air Quality Control:
Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.
3. Material Conveyance:
In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.
4. Dust Suppression:
Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.
5. Instrumentation and Control:
Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.
6. Explosive Applications:
In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.
7. Maintenance and Repair:
Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.
It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.
By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.
.webp)
What is the purpose of an air compressor?
An air compressor serves the purpose of converting power, typically from an electric motor or an engine, into potential energy stored in compressed air. It achieves this by compressing and pressurizing air, which can then be used for various applications. Here’s a detailed explanation of the purpose of an air compressor:
1. Powering Pneumatic Tools: One of the primary uses of an air compressor is to power pneumatic tools. Compressed air can be used to operate a wide range of tools, such as impact wrenches, nail guns, paint sprayers, sanders, and drills. The compressed air provides the necessary force and energy to drive these tools, making them efficient and versatile.
2. Supplying Clean and Dry Air: Air compressors are often used to supply clean and dry compressed air for various industrial processes. Many manufacturing and production operations require a reliable source of compressed air that is free from moisture, oil, and other contaminants. Air compressors equipped with appropriate filters and dryers can deliver high-quality compressed air for applications such as instrumentation, control systems, and pneumatic machinery.
3. Inflating Tires and Sports Equipment: Air compressors are commonly used for inflating tires, whether it’s for vehicles, bicycles, or sports equipment. They provide a convenient and efficient method for quickly filling tires with the required pressure. Air compressors are also used for inflating sports balls, inflatable toys, and other similar items.
4. Operating HVAC Systems: Air compressors play a crucial role in the operation of heating, ventilation, and air conditioning (HVAC) systems. They provide compressed air for controlling and actuating dampers, valves, and actuators in HVAC systems, enabling precise regulation of air flow and temperature.
5. Assisting in Industrial Processes: Compressed air is utilized in various industrial processes. It can be used for air blow-off applications, cleaning and drying parts, powering air-operated machinery, and controlling pneumatic systems. Air compressors provide a reliable and efficient source of compressed air that can be tailored to meet the specific requirements of different industrial applications.
6. Supporting Scuba Diving and Breathing Systems: In scuba diving and other breathing systems, air compressors are responsible for filling diving tanks and supplying breathable air to divers. These compressors are designed to meet strict safety standards and deliver compressed air that is free from contaminants.
Overall, the purpose of an air compressor is to provide a versatile source of compressed air for powering tools, supplying clean air for various applications, inflating tires and sports equipment, supporting industrial processes, and facilitating breathing systems in specific contexts.
editor by CX 2023-10-02
China best Air Suspension Viair Chrome 480c Single Air Compressor wholesaler
Product Description
SPECIFICATIONS
12 Volt
Duty Cycle:100% @ 100PSI
Duty Cycle:50% @ 200PSI
Max Working Pressure :200PSI
Max Amp Draw: 45Amps
3/8″NPT Inlet port
Net Weight:22lbs
P/N 11″Lx4″Wx6.55″H
PERFORMANCE DATA
| PSI | 0 | 40 | 90 | 150 | 200 |
| AMPS | 24 | 34 | 38 | 40 | 38 |
| CFM | 3.5 | 2.7 | 2.2 | 1.6 | 1.2 |
| LPM | 100 | 78 | 62 | 46 | 33 |
| BAR | 0 | 3 | 6 | 10 | 14 |
TANK FILL DATA
2.5 Gallon Tank
0 to 200 CZPT 2 min 30 sec
150 to 200 CZPT 40 sec
5.0 Gallon Tank
0 to 200 CZPT 5 min 10 sec
150 to 200 CZPT 1 min 30 sec
Our Advantages
1 . Competitive price than other manufactures
2 . Portable to carry with
3 . Fast inflation and low noise
4 . Can be pumped more than 20 , 000 times
5 . Anti-dust
How to guarantee your after sales service?
1. We check every item’s quality during the production
2. Recheck the products before shipment to ensure our packaging in good condition.
3. Track and receive feedback from our customer.
4. We will response quickly to our client within 24 hours, every issue will be highly focused on.
Viair 480C Black Dual Pack Air Compressor Air Ride Bagged Compressor
|
Included Parts |
Specifications |
|
|
|
|
12-Volt |
|
|
|
– Mounting hardware (nuts, bolts, locking washers) |
Permanent Magnetic Motor |
||
|
– Vibration isolators |
Duty Cycle: 100% @ 100 PSI |
||
|
– Remote mount air filter assembly |
Max. Working Pressure: 200 PSI |
||
|
– Two replacement air filter elements |
Max. Amp Draw: 23 Amps |
||
|
– Air line for remote mount air filter installation |
Max. Intermittent Pressure: 300PSI |
||
|
– Stainless steel braided leader hose |
Max. Flow Rate: 50L/Min (1.76CFM) |
||
|
– Check valve |
Dimensions: 261 x 106 x 167.7mm |
||
Performance Data
|
PSI |
CFM |
A |
BAR |
LPM |
A |
|
0 |
1.76 |
10 |
0 |
50 |
10 |
|
10 |
1.66 |
12 |
1 |
46 |
13 |
|
20 |
1.59 |
14 |
2 |
43 |
14 |
|
30 |
1.52 |
15 |
3 |
40.5 |
17 |
|
40 |
1.45 |
16 |
4 |
38.5 |
18 |
|
50 |
1.41 |
17 |
5 |
35.5 |
19 |
|
60 |
1.34 |
18 |
6 |
33 |
19 |
|
70 |
1.27 |
18 |
7 |
31.5 |
19 |
|
80 |
1.2 |
19 |
8 |
29.5 |
20 |
|
90 |
1.16 |
19 |
9 |
27 |
20 |
|
100 |
1.13 |
19 |
10 |
25 |
19 |
|
110 |
1.06 |
20 |
11 |
23 |
19 |
|
120 |
1.02 |
20 |
12 |
20.5 |
19 |
|
130 |
0.95 |
20 |
13 |
18 |
18 |
|
140 |
0.92 |
19 |
14 |
15.5 |
18 |
|
150 |
0.85 |
19 |
|
||
|
160 |
0.81 |
19 |
|
||
|
170 |
0.74 |
19 |
|
||
|
180 |
0.7 |
19 |
|
||
|
190 |
0.63 |
18 |
|
||
|
200 |
0.56 |
18 |
*Supply Voltage: 13.8 Volts |
||
|
Fill Rates |
|
|
2.5 Gallon Tank |
Fill Rate |
|
0 To 145 PSI |
2 Min. 29 Sec. |
|
110 To 145 PSI |
57 Sec. |
|
0 to 200 PSI |
5 Min. 02 Sec. |
|
165 to 200 PSI |
1 Min. 23 Sec. |
|
5.0 Gallon Tank |
Fill Rate |
|
0 To 145 PSI |
6 Min. 02 Sec. |
|
110 To 145 PSI |
1 Min. 55 Sec. |
|
0 to 200 PSI |
10 Min. 08 Sec. |
|
165 to 200 PSI |
2 Min. 20 Sec. |
| Classification: | Variable Capacity |
|---|---|
| Job Classification: | Rotary Type |
| Transmission Power: | Turbine |
| Cooling Method: | Air-cooled |
| Cylinder Arrangement Mode: | Duplex |
| Cylinder Stage: | Double Stages |
| Samples: |
US$ 69/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
editor by CX 2023-06-07
China 480C Chrome Truck Mount Constant Duty Air Compressor for Car Truck Trailer Train Horns Suspension Systems supplier
Model: Alexander 126H
12 months: 1976-1991
Motor: –
OE NO.: VU4
Car Fitment: ABG
Condition: New
Warranty: 1 Year
Voltage: DC12V
Auto Model: Common
Model Number: Air Compressor 480C
Compressor type: Common Automobile Ac Compressor
Application: Cair air trip suspension program
Packing: Neutral Packing
MOQ: 2PCS
Good quality: Large Functionality
PAYMENT: T/T. thirty% Deposit.Western Union
Solution Identify: Air ride compressor
Certification: CE ROHS ISO9001
Packaging Specifics: Carton Box , Pallets
CZPT Higher Performance Air Ride Suspension Compressors ,.480C is a truly rated, two hundred PSI-rated compressorProduct DetailsProduct DetailsAble to run 200 PSI in tanks as large as ten-gallons in size, the 480C’s are ideal for air suspension, air inflation, air equipment,and blasting Teach Horns. With a a hundred% obligation cycle at one hundred PSI, the 480C twin pack was developed for the difficult work thatrequire an extended operate time. Making 3.fifty three CFM of strain, the 480C is significantly more rapidly than your normal continuous responsibility compressor, CZPT to recharge a 2-gallon tank from a hundred sixty five-200 PSI in only about 30 seconds, and recharging a 5-gallon tank from a hundred sixty five-200 PSI is just above a minute and a 50 percent.The 480C dual pack comes full with a distant mountable intake filter assembly, or ” low cost components for bicycles cycle brake wire agali mounted equipment sprocket bicycle passion professional bicycle spare elements Air Filter Snorkel Package”, allowing you to relocate the air filter up to 6 toes absent to preserve it absent from moisture and particles. It also contains a standard 3/8″ NPT stainless steel braided leader hose with examine valve and insulated wiring for rapidly installation, as properly as 2 hefty-obligation forty-amp relays and a one hundred sixty five PSI minimize-on, 200 PSI reduce-off large-responsibility pressure swap.Specifications: * Stainless Metal 3/8″ NPT Chief Hoses & Verify Valves * Oil-less Style * Pewter End * Computerized Reset Thermal Overload Protectors * 3.fifty three CMF @ PSI * a hundred% Obligation Cycle @ 100 PSI – Consistent Obligation * Max Tank Measurement: 10-Gallon * Max Amp Draw: forty four Amps @ twelve-Volts * a hundred sixty five-200 PSI Pressure Change with 1/8″ NPT Threads & 40 Amp 4 Pin Relays * Compressor Duration: ten.87″ (276.09 mm) * Compressor Width: 4.2″ (106.68 mm) * Compressor Peak: 6.seventy five” (171.forty five mm)
| Item | Air Trip Suspension Chrome Compressor 480C |
| Material | Aluminum |
| Voltage | DC12V |
| Flow | 1.8CFM |
| Brand | ALITAIR |
| Warranty | 1 Calendar year |
| Thread | 1/4″3/8″ Planetary Equipment DC Motor 48v 36v 120w dc motor brushless |
How to Choose the Right Air Compressor
An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
Electric motor
While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
Oil bath
Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.
Start/stop control
An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
Variable speed drive
A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.
editor by czh 2023-02-10
China Viair DC12V 480c NPT1/4 Portable Air Ride Suspension Compressor best air compressor
Merchandise Description
WHAT IS AN AIR SUSPENSION COMPRESSOR?
An air suspension compressor is a modest air compressor that is utilized to, as you can probably guess, compress air to be employed in your air suspension system. These compressors need to have to be wired into a energy resource and will generally kick on when you turn your automobile on and when the air strain is reduced in your system.
DO I Need to have 1 OR TWO COMPRESSORS?
When constructing out your air suspension program, you should figure out whether or not you want 1 or 2 compressors. Whilst 1 compressor is usually ample for smaller sized automobiles, managing 2 compressors can assist make certain that you have far more than sufficient air. This is ideal for individuals who like to use their kit far more often than others to make certain you usually have a constant supply of compressed air running by way of your technique.
WHAT IS THE Ideal AIR SUSPENSION COMPRESSOR?
Because your air compressor is the only way your air suspension method can get air, you will want to make certain you get a high-quality compressor. At AccuAir, we advocate and supply the ideal air compressors in the business from ViAIR. ViAIR is 1 of the major and most recognizable air suspension compressor businesses with an unmatched reputation.
HOW DO I MOUNT MY AIR COMPRESSOR?
The air compressor in your air suspension program have to be mounted securely to make certain it performs appropriately and stays upright. Mounting an air compressor will vary from car to car, based on the mounting floor. Some will be mounted to a wood board and carpet, even though other people may be mounted to a truck body. If you are using an AccuAir ENDO tank, you can use our exceptional mounting brackets to very easily mount your air compressor to your air tank for a thoroughly clean and simple install.
|
US $90 / Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| After-sales Service: | Spare Parts Free Replace |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Oil-free |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
|
US $90 / Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| After-sales Service: | Spare Parts Free Replace |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Oil-free |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
The Air Compressor Is a Versatile Tool
The Air Compressor is one of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.
Oil-injected
Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.
Oil-free
What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
Gasoline
When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.
Electricity
Electricity in an air compressor is not cheap. A 25 HP air compressor runs for ten hours each day, five days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for three hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to four thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
Variable frequency drive
The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of six to seven bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is one of the best investments in your compressor. So, why wait any longer?
editor by czh 2023-01-02
China Air Ride Suspension Compressor Compatible with Volkswagen Tourage 2004-2010 Audi Q7 2007-2015 Porsches Cayenne 2003-2010 air compressor oil
Solution Description
Air Suspension Compressor Substitution VW Volkswagen Touareg Porsches Cayenne 7L061606D 95535895710,95535895711,95535895712
Quick Depth
| Description : | Air Suspension Compressor For Audi Q7 Porsches Cayenne Volkswagen Touareg 7L069806D 7L0698 Air Compressor Fix Components | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product: |
For Audi Q7 206D 7L0698 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Material: |
Rubber and Steel
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Condition: |
Brand name New
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Software: |
Audi Q7,Porsches Cayenne,Volkswagen Touareg
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Delivery: |
3-7 days soon after obtaining payment
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Deal: |
Neutral Packing or As Requirement
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Location of origin |
ZheJiang , China
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Certification: |
ISO906D 95535895710,95535895711,95535895712
What is the Air Suspension Air Compressor all about? A device that compresses and pressurizes air. Employed to inflate air springs. An Air Suspension Compressor also named Air Compressor or Air Pump, inflates or deflates air spring luggage as needed. When a car with air suspension drops under the manufacturing facility-outlined height, the air suspension compressor, also simply known as an air compressor or air pump is activated and inflates the air bags or air struts.
Air Suspension Compressor Perform An air compressor is a equipment that makes use of an electrical motor or gas motor to electrical power a gadget that sucks in successive volumes of air from the ambiance, compresses (squeezes) each volume of air in a confined location to improve its strain by producing the volume more compact, and then transfers the higher-strain air to a receiver tank, The substantial-force air is drawn off from the receiver tank to electrical power equipment.
Air compressors work Air compressors operate by forcing air into a container and pressurizing it. Then, the air is pressured via an opening in the tank, exactly where strain builds up. Consider of it like an open balloon: the compressed air can be employed as energy as it is launched. They’re powered by an motor that turns electrical power into kinetic energy. It is related to how a combustion motor functions, employing a crankshaft, piston, valve, head and a connecting rod. From there, the pressurized air can be employed to electricity a variety of resources. Application of air suspension compressor TechniquesAir compressors have many utilizes, such as: providing higher-pressure clear air to fill gasoline cylinders, providing moderate-pressure clear air to a submerged area provided diver, providing reasonable-strain cleanse air for driving some office and university building pneumatic CZPT handle technique valves, providing a big sum of reasonable-stress air to electricity pneumatic tools, these kinds of as jackhammers, filling higher strain air tanks (HPA), for filling tires, and to produce big volumes of average-pressure air for large-scale industrial processes (these kinds of as oxidation for petroleum coking or cement plant bag home purge techniques).[6] Air compressors are also widely employed in oil and fuel, mining and drilling applications as the flushing medium, aerating muds in underbalanced drilling and in air pigging of pipelines. Most air compressors either are reciprocating piston kind, rotary vane or rotary screw. Centrifugal compressors are typical in really large applications, while rotary screw, scroll,[7] and reciprocating air compressors are favored for little and medium sized applications.
Air suspension compressor Features Air bag suspensions methods are a characteristic located on many luxurious automobiles and SUVs. An air bag suspension program serves the same function as a normal suspension technique, even so, as an alternative of making use of metallic springs and liquid loaded shocks, it utilizes a method of inflatable air bags loaded with compressed air to suspend the automobile off the ground. One of the most important components of an air bag technique is the compressor. The compressor is what supplies the total technique with the compressed air needed to inflate the airbags and assistance the bodyweight of the vehicle. With no the compressor, the entire air bag technique would be left with no air, and the car would be still left with an inoperable suspension
Very hot Goods
Organization Profile HangZhou Xihu (West Lake) Dis. Xihu (West Lake) Dis. Auto Parts Production Co., Ltd.,The company mostly engaged inautomotive chassis elements, motor components,spray series merchandise. The company supply design and style, study and development,creation, income, for the domestic and foreign automotive assembly plant and the international right after-revenue market to provide substantial quality automotive parts. The firm now provides supporting companies for Mercedes Benz,Audi,BMW,Volkswagen,Por-sche,Land Rover,Bentley,Jaguaretc. Through brand positioning, the organization supplies higher-good quality original components and value-effective publish-marketplace model areas for the international automotive sector.Now, it has set up agents and distributors in a lot more than 35 countries all around the entire world,XIHU (WEST LAKE) DIS. brand name is the initial batch of producers authorized by the Chinese ministry of commerce tomeet the export specifications.The company by means of the steady high quality, the trustworthy prestigeand the customer first theory obtains the customer’s assistance.
What We Do
FAQ
About Us XIHU (WEST LAKE) DIS. Brand, is a leading profeesional air suspension and chassis car part organization which specializing in developing, making and exporting air suspension strut, air spring, air compressor, suspension mend components, rubber sleeve, aluminum cover, power steering rack and so on. Our items can be put in in automobiles, vans, trails, buses, and also compoatible with passenger cars and industrial items. We can offer a lot more than ten,000 type of goods which suit for Mercedes-Benz, Audi, BMW, Land Rover, Porsch,and so on. We usually offer higher good quality products and ideal support so that we not only have a really big industry percnetage in domestic maket but also retaining a steady development in the world-wide industry. We export to North The us, Europe, Middle East, Africa and Southest Asia, which included ninety countires and areas.
Company Culture: Organization philosophy: consider it from the society and serve the culture Service: one.High quality Warranty: in accordance to the clients’ request, we could promise fron 12 month to 24 months. Gain 1. we are leading 3 of skilled air suspension maker in China. OEM/ODM Services: – If you want to show your very own model Emblem on the items this sort of as cable, package deal bag, label or any exactly where. Our OEM and ODM support is always ready to do it. Make sure you get in touch with with our product sales staff to get best assist. Packing: Delivery:
###
###
###
###
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||